FlameSafe FS 900+ Sealant is cost-effective & cures to form a flexible shield against fire/smoke. Usable in various construction/architecture joint configurations. A versatile solution for many through-penetration & joint construction settings.

Features

• Elastomeric, Versatile and economical, Non-sag or Self-leveling grades
• No VOCs, non-toxic, low odor, paintable, Interior grade, will not damage plastic pipes or cable jackets.
• UL classified & Factory Mutual approved. Firestop systems listed for through penetration & joint systems. Listed in systems with up to 4-hr fire rating. Tested to UL 1479 (ASTM E814), UL 2079 (ASTM E1966 and E1399), UL 723 (ASTM E84).
• Sound transmission tested in accordance with ASTM E90 and Sound Transmission Class (STC) Rating 62.
• No solvents, silicones or outgassing. Water-based, easy to use and clean up. Excellent adhesion to a variety of substrates and penetrants and easy to apply.

RS 136 is a 1-component, incombustible fire-block, draft stop caulk. Not for use in continuous vibration environments. Do not dilute. Store between 35°F & 100°F for minimum 2 years shelf life. Best protected from freezing- thaw before use if frozen.

Features

• May be used as a smoke seal (check local authority for approval before using as smoke seal.)
• Inorganic and has No Volatile Solvents which makes it particularly useful when installing in confined spaces or occupied areas. Does not have Asbestos Fillers.
• A single component system, no mixing necessary and no required additives.
• ASTM E 136 compliant, D O T Classification is Not Regulated.
• A general purpose and acoustical fire-block/smoke seal caulk which can be applied with a conventional caulking gun and An easy installation sealant with water cleanup capabilities.

Metacaulk 950 is a 1-part fire-rated sealant for through-penetration firestop systems. Prevents flames/smoke/gas/water moving through penetrations. Systems rated for 1, 2 & 3 hrs. according to ASTM E 814 (UL 1479) & ULC CAN 4-S115M test standards.

Features

• Inorganic and has No Volatile Solvents- useful when installing in confined spaces or occupied areas, and VOC compliant and Protected in both wet/dry stages against mold growth with a combination of biocides.
• A single component penetration sealant system, no mixing or special skills necessary & no required additives.
• D.O.T. Classification is Not Regulated.
• Applied with a conventional caulking gun, trowel or with pumping equipment. An easy installation sealant with water cleanup capabilities. Non-slumping & forms a hard retrofittable surface.
• Forms a hard char, Formulated with incombustible inorganic materials & won’t create smoke or toxic gases, and Does not have Asbestos Fillers. Resistant to chemical exposure.

Metacaulk Industrial Cable Coating is a ready-to-use, heavy duty spray coating which is ablative & made to impede vertical/horizontal fire propagation along grouped/single comm. or power cables. Made for industrial/utility applications.

Features

• Factory Mutual (FM) approved- our formulation has been used by major utilities/corporations for over 25 years & is considered by some as the industry standard.
• Water-based, Low odor, is compatible with and adheres to typical cable jacketing materials. No ampacity reduction (no cable derating)
• Halogen free and does not contain solvents, plasticizers, asbestos, or other hazardous inorganic fibers
• Flexible and durable- The application of an additional protective coating is not necessary.
• UV/Water/weather resistant and suitable for interior or exterior applications, virtually unaffected by radiation exposure

RectorSeal Smoke and Acoustic Sealant is high-grade acrylic latex sealant that permanently seals penetrations, membrane openings, & static/dynamic joints in smoke & sound-rated assemblies. Tested to ASTM E84, ASTM E90, ASTM E1399, ASTM C834.

Features

• Tested for air leakage in accordance to modified UL 1479 and modified UL 2079.
• Low VOC and Meets LEED criteria under Environmental Air Quality and Regional Materials.
• Paintable, Flexible set and Easy to dispense. Water clean up, May be used in vertical and horizontal assemblies in linear joints in walls or floors.
• Interior grade and Protected in wet and dry stages against mold growth with a combination of biocides.
• STC rating 69- highest STC rating in market (tested to E90 standards as a smoke sealant)

Metacaulk 835+ is a 1-component, fire-rated elastomeric silicone sealant for through penetration firestops. Prevents flames/smoke/gas/water spreading through penetration openings. Silicone based – use in systems where dynamic movement is expected.

Features

• STC rating 55 as well as FBC System Compatible- indicates that product has been tested, and is monitored on an ongoing basis to assure chemical compatibility with FlowGuard Gold, BlazeMaster and Corzan pipe and fittings.
• A single component penetration sealant system – no mixing or required additives needed.
• Flexible and non-slump formula. Neutral, moisture cure and low odor. Excellent moisture resistance. Protected in wet & dry stages against mold growth with a combination of biocides.
• D O T Classification is not regulated.
• Use in interior or exterior expansion, contraction and control joints. Use in exterior and interior penetrations. Available in 2 grades: caulk grade & self-leveling. Applied with a conventional caulking gun, trowel or with pumping equipment.

All grades of Metacaulk 1200 are single-component, general-use fire-rated sealant for construction joints. Cures to elastomeric membrane seal suitable for dynamic movement areas. Prevents spread of flames/smoke/hot gas/water through joint openings.

Features

• Minimum 3 Year Shelf Life and Protected in a wet stage as well as in a dry stage against mold growth with a combination of biocides.
• Paintable, VOC compliant, Excellent Freeze-thaw and Water based
• Rated for up to 4 hrs in accordance with ASTM E1966/UL 2079 (Tests for Fire Resistance of Building Joint Systems) standards. Cycled 500 times, meeting new ASTM E 1399 standard. Tested in accordance with ASTM E 814 (UL1479) for systems up to 3 hours.
• No dilution or mixing is required for use.
• Sprayable, brushable trowelable caulkable & pourable- mastic grade for efficient installation on long joint runs, self-leveling for horizontal use when fast installation is needed & caulk grade for easy-to-apply non-sag sealant using caulk gun/trowel

Metacaulk 1000 is a 1-component, general fire-rated sealant/smoke seal for construction joints & through-penetrations. Cures to elastomeric seal suited to dynamic motion. Stops flames/smoke/hot gas/water moving through joints & through penetrations.

Features

• Protected in wet & dry stages against mold growth with a combination of biocides.
• Non-sag caulking grade sealant that is easy to apply & retrofit. Water Based and Flexible Set with a Minimum 3 Year Shelf Life. Excellent freeze-thaw and For interior use – paintable
• Safe and Easy to Use. No dilution or mixing is required for use. No special skills necessary to install. Apply with a conventional caulking gun, bulk loading gun or trowel from the pail. For large applications, can be pumped directly from the pail.
• Highly intumescent and VOC compliant
• Systems rated for 1, 2, 3 & 4 hours in accordance with ASTM E 814, UL 1479 UL 2079 & ULC-S115-95 standards. STC rating 62.