Metacaulk Putty is a moldable non-curing 1-component fire-rated material for through penetration firestop systems. Intumesces when exposed to fire, forming an insulating char. Prevents spread of flames/smoke/gas/water through penetrations.

Features

• For interior use and has No Volatile Solvents- useful when installing in confined spaces or occupied areas. Does not have Asbestos Fillers. D.O.T Classification is Not Regulated.
• Applied by hand and Easy to install- Mixing never required and no special skills or additives are necessary for installation. Adheres to all common building common surfaces.
• Rated for up to 3 hrs. in accordance with the ASTM E 814, UL 1479 and ULC/CAN4-S115-M test standards. Pads have Sound Transmission Class (STC) Rating 60. Only one pad thickness (1/8″) needed for a 1-2hr. fire rating.
• No additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box.
• Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches.

Metacaulk Putty is a moldable non-curing 1-component fire-rated material for through penetration firestop systems. Intumesces when exposed to fire, forming an insulating char. Prevents spread of flames/smoke/gas/water through penetrations.

Features

• For interior use and has No Volatile Solvents- useful when installing in confined spaces or occupied areas. Does not have Asbestos Fillers. D.O.T Classification is Not Regulated.
• Applied by hand and Easy to install- Mixing never required and no special skills or additives are necessary for installation. Adheres to all common building common surfaces.
• Rated for up to 3 hrs. in accordance with the ASTM E 814, UL 1479 and ULC/CAN4-S115-M test standards. Pads have Sound Transmission Class (STC) Rating 60. Only one pad thickness (1/8″) needed for a 1-2hr. fire rating.
• No additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box.
• Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches.

Metacaulk Box Guard is a 1-component fire-rated pad for use in electrical boxes. When exposed to fire, it will expand forming a char that seals the opening, prevents spread of flames & limits temperature rise on unexposed surfaces.

Features

• Metacaulk Box Guard is applied by hand, and must comply with NEC 314.16 (formerly 370.16) or other applicable codes. STC 53 Rating, Tested in a UL 411 wall assembly/section to ASTM E90.
• Easy to Install- Adheres to Back of Electrical Box. Cost Effective and Great for retrofit jobs.
• Highly Intumescent firestop material
• Non-Conductive, Dielectric Breakdown Voltage 22V/mil (ASTM D 149)
• A labor saving, economical alternative to putty pads.

Metacaulk Cover Guard is a 1-piece fire-rated gasket for meeting the “24-in rule” in electrical boxes. When exposed to heat, intumescent material expands/forms a char to seal opening, prevent flame spread & limit heat transfer to unexposed areas.

Features

• Mounted on inside of cover plate & installed simultaneously- covers the opening & provides necessary fire protection.
• Easy to install- applied by hand, does not take up volume in the electrical box & a labor-saving replacement for putty pads in normal applications
• Highly intumescent
• Cost Effective and Great for safe retrofit applications
• Reduces sound transmission- STC rating 54

A flexible firestop material used in concrete/masonry control floor & wall joints up to 2″ (51 mm) wide. Forms a strong char preventing passage of flame, smoke, & hot gases between control joints. Can use with plastic pipe penetrations.

Features

• Easy to install and Cost effective
• Versatile, Flexible
• Highly intumescent (multiple staged)
• Forms a strong char to prevent passage of flame, smoke and hot gases
• May be covered with any color standard architectural caulk

Metacaulk Wrap Strip is a highly intumescent firestop material strip mainly for plastic & insulated pipe applications. When exposed to fire, it expands & forms a very hard char to seal the penetration stopping the passage of flames & hot gases.

Features

• Easy to install, Cost effective, Versatile, Flexible
• Excellent freeze/thaw characteristics and No cure time
• Long length means less waste
• Systems up to 14″ PVC

Blaze Foam is an intumescent compressible foam used to firestop head of wall, wall to wall and bottom of wall joint applications both dynamic and static. Tested in accordance with ASTM E1966 (UL 2079). 

Features

• Quick and easy one step installation
• Not affected by temperature
• No hazardous ingredients
• STC rating 64, tested to UL 2079
• No mechanical fastening required

Metacaulk Fire Rated Mortar is a rapid-hardening gypsum/cement compound with the best combination of workability, strength & fire resistance. When mixed with clean water to a suitable consistency it forms a rigid, gas tight, fire-resistant seal.

Features

• Systems rated for up to 4 hours & tested in accordance with ASTM E 814 (UL 1479) and ULC-S115-95 test standards.
• Non-sag adjustable consistency (pourable or trowelable)
• Sets without shrinking Protected in wet & dry stages against mold growth with a combination of biocides
• Safe and simple to use- no special tools needed to mix or install
• Workable in approximately 45 minutes & can easily be cut/drilled/resealed if future penetrants are needed. High yield per pound

Metacaulk Composite Sheet is hard fire-resistive panel for sealing penetrations/restoring fire rating to floors/ceilings/walls with penetrating openings. Intumescent material bonded to steel sheet that chars/slows heat transfer when exposed to fire.

Features

• Intumesces (expands with heat) to form a refractory char that tightly seals penetrations against flame spread, smoke and toxic fumes. UL Classified. Provides up to a 3 hour fire rating
• Lightweight, thin sheets are easy to handle, cut and form to desired or irregular shape
• Easy to install using common trade tools- fasten, bolt punch or drill through using self-tapping screws or anchor bolts. No mixing or damming for clean install. Cost effective- high performance vs. installed cost and is Re-enterable
• Non-flame supporting and Thermally conductive: allows unwanted heat build-up to escape.
• No VOC’s and Normal disposal procedures.

Metacaulk Firestop Pillows are made for use in large openings with cables, cable trays, blank openings or multiple penetrating items. They prevent spread of flames/hot gas through openings. They are reusable & can be removed/reinstalled if needed.

Features

• Highly intumescent and Form a very strong char when burned
• No wire mesh required in certain installations and Easy to install – no tools and no cure time required
• Cost effective and Versatile
• Two sizes